#!/usr/bin/perl -w
# $URL: svn+ssh://mrwhat@ssh.boim.com/home/mrwhat/svn/Walker/trunk/hipForks73x97.pl $
# $Id: hipForks73x97.pl 420 2014-04-21 16:40:47Z mrwhat $
#
# script to draw Walker parts which can be cut from 2.5mm (0.100") stock
#
#  It appears that the supplier in Tucson has 0.098" stock which is actually 2.2mm thick.
#  (This may be the same thing as the "2mm" stock at Ponoko)
#  This is a good thickness (<~= 4.5mm/2) for cranklinks, EF, BH, D-fork, and gear side plates

require 'laserCutPartsGroups.pl';
require 'JansenDefs.pl';

($wPx,$hPx) = &parseSizeFromFileName($0);  # get this from file name to make SURE it matches

&printLaserCutHeader($wPx,$hPx);

&drawBEDforkGroup(6.5,6.5,0,8); ### forks for CD on BED, need a total of 8

print "</g></svg>\n"; # end of drawing